EM-BGT13006-TJ GPS/GLNSS (L1) Timing Antenna & Mount Kit

  • High Selectivity Dual Filter RF Architecture Eliminates High Power RFI Operating within Multi-Located Base Station Environment
  • Impact Resistant ASA Radome
  • Rugged Die-Cast Aluminum Base
  • IP67 Rated
  • UV Resistant/Cool Gray for Reduced Visibility
  • Mounts to Standard Pipe, up to 1-1/2"
  • High Grade SS and Dacron Plated Steel Mounting Clamps Included

Application: GPS/GLONASS/Navigation

Part Number: EM-BGT13006-TJ


Electrical Specifications

Frequency Band1574.4-1610 MHz
VSWR<2.0:1
Impedance50 Ω
Gain32 ± 3 dB at 5 V
Noise Figure3.1 dB Typical, 3.5 dB Max
Operational Voltage, Vdc2.7 - 5.5 V
Current Drain, Idc7-13 mA Typical, 15 mA Max at 5 V, High Temp.
Rejection out of Bandup to 70 dB
DC InjectionCoaxial Feed Cable Center Conductor
ESD Protection15 kV

Mechanical Specifications

Color / FinishCool Gray
Height10.38 in (264 mm)
Width3.25 in (83 mm)
Equivalent Flat Plate Area0.0838 ft2 (77.85 cm2)
ConnectorTNC Jack
MountingPole / Mast Mount
Weight16.8 oz (476 g)
Mounting Mast and Hardware / MaterialOffset Clamp / SS & Dacron Plated Steel Clamps
Mounting Mast / Pipe3/4 in NPT 316 SS Pipe
Wind Velocity, Rated150 mph (241 km/h)
Operating Temperature-40° to +85° C
CorrosionSalt Fog
Humidity95%
Ingress ProtectionIP67